The PPG Wave 3.V has a considerably extended and enhanced feature set compared to its predecessor, the PPG Wave 2.V. The following table highlights the most important new features and improvements.
|
PPG Wave 2.V |
PPG Wave 3.V |
Number of Voices per instance |
64 |
256 |
Number of Wavetables |
30 All Wavetables from PPG Wave 2.2. |
164 All Wavetables from PPG Wave 2.2 and PPG Wave 2.3 (two Wavetables are slightly different). New Wavetables created by Wolfgang Palm. |
Preset Sounds |
Ca. 1000 Reprogrammed factory soundsets plus various new soundsets. |
Ca. 3000 Original factory soundsets, all soundsets from PPG Wave 2.V, new sounds and multis with effects, samples or the new wavetables. |
Samples |
2 The original PPG Wave 2.2 Saxophone and Piano sample in Wavetable 31 |
Unlimited in AIFF and WAV format with Drag&Drop support. Contains the whole (as known and available) PPG Waveterm B Sample Library in all its glory. The Waveterm B samples can be played back with 8- or 12-bit resolution, AIFF and WAV samples can be played back with 8-, 12- or up to 32-bit resolution. Playback in 8- or 12-bit resolution results in the typical grungy sound known from early samplers. |
Browser |
— |
Bank, Sound and Sample Browser with full Drag&Drop support. Files can be dragged between PPG Wave 3.V and the desktop or between multiple instances of the PPG Wave 3.V. |
Import |
— |
Imports system exclusive data from PPG Wave 2.2 or PPG Wave 2.3 with OS V8. Imports samples and sounds from Waveterm B disk images. |
Oscillators |
Approximation of aliasing of the original PPG Wave 2.2 and PPG Wave 2.3. |
Oscillators are calculated exactly like the original PPG Wave 2.2 and PPG Wave 2.3 with a very high sample rate but no interpolation at all resulting in an exact reproduction of the original aliasing and behaviour. |
Filter |
24 dB Low Pass Filter modelled after the analog SSM filter chip of the PPG Wave 2.2 and PPG Wave 2.3. |
24 dB Low Pass Filter modelled after the analog SSM filter chip of the PPG Wave 2.2 and PPG Wave 2.3. Additional 12 dB slope. 8 adjustable Cutoff and Resonance offsets plus one total Cutoff and Resonance offset to emulate the inexact calibration of the 8 filters of the original PPG Wave 2.2 or PPG Wave 2.3. |
Filter Drive |
— |
Post-filter Overdrive circuitry with selectable Diode or Tube characteristic. |
Envelopes |
Good approximation of the envelope shapes of the original PPG Wave. |
Close emulation of the behaviour and shape of the envelopes of the original PPG Wave, which even changes in shape with different rate settings. |
Modulation |
Original modulation destinations, amount and behaviour. Some modulations can only be switched on or off, others can be set to 8 different depths. |
Original modulation destinations, amount and behaviour. Additional "FINE" mode offering further modulation destinations and fully variable depths. |
Outputs |
2 Stereo Outputs. |
8 Stereo Outputs. |
Multi Mode |
8 Sounds playable on MIDI Channels 1 to 8. No layers, key splits, velocity splits etc. |
8 Sounds. Selectable MIDI Channel for layer sounds, free key and velocity range for splits, individual transpose, detune, volume, pan and output selection per part. Also used to create multi samples. |
Effects |
— |
Each part has its own set of 6 effects resulting in up to 48 effects at once (optionally Part 1 can be set to process the effects for all parts, which is useful for e.g. multi samples). Effects on non-played parts don't consume processor power. |
Equalizer |
— |
4-band fully parametric Equalizer. |
Overdrive |
— |
Stereo Overdrive with types Light, Medium, Heavy, Clip, Tube, adjustable output gain and post-drive filter with tone and emphasis. |
Chorus |
— |
2- to 6-stage Stereo Chorus / Flanger with variable stereo spread. |
Phaser |
— |
2- to 12-stage Stereo Phaser with variable stereo spread, spacing and feedback. |
Delay |
— |
Stereo- und Ping-Pong-Delay, synchronizable to incoming tempo information, low and high damping in input and feedback. |
Reverb |
— |
Stereo Reverb with eighties sound character. |